Panel GAMMA will create original compositions for the walls. Line type connection facilitates the gathering of panels with different texture direction of the coating. Strap width 30 mm when using a palette different from the basic color panels add volume to the composition and forms a gap between the panels 10 mm. Strap width 20 mm connect the panels without gaps and implies a variation of the schemas used installation.
Interior wall panels are installed on any level surface (drywall veneer, plastered, spackled walls, plywood or wooden rails) using profiles which are attached to the frame or wall.
For installation it is necessary to partition space and profiles, preparing them to the appropriate sizes. In the groove of the L-profile insert panel trim (ledge down, pre-cut it on the panels of the Octave and fifth) according to the version of the docking panel, locking it with a klyaymera and nails. The L-profile is used at installation of panels with the start angle, and also when installing the bottom and the top. For registration of the final angle is used the final profile, internal and external corners applied universal corner profile. The finished form of the composition will give a flat floor skirting to match walls. Installation of baseboard recommended using clips or liquid nails.